#REGA PLINTH UPGRADE INSTALL#

Take off the old one вЂ“ put on the new one. The original platter just has to be exchanged with the acrylic one. You will get a Certificate of Authenticity for this item. This tuning device was developed with 20 years of experience in processing and handling of PLEXIGLASВ® materials and turntable fabrication.

#REGA PLINTH UPGRADE INSTALL#

This enables you to install a cartridge of a higher quality. This tuning device not only looks nice, it also sounds nice! Included in delivery is a 2mm brass shim/spacer for tonearm adjustment on Rega 2Дelivery time after order approx 10 weeks! The most accurate drive belt we have ever produced, the Reference EBLT is now fitted as standard to all Planar 8 and Planar 10 turntable models as standard. REGA MM/MC Phono Preamplifiers - Phono Stages The Rega Reference EBLT drive belt is the culmination of many years of R&D and advanced tooling trials.Hi, will this fit a Rega deck with 3-point fixing tonearm? E. i would like to get your bracing for my table. Andbim waiting for the rega 330 arm to come. Hi can you tell me if I need a spacer for my Rega arm, and does the brace fit under the arm and bearing housing when fitting your top brace on a Rega 2019 P2 24V I always believe in 'hearing is believing!' I know theory and experience are two separate universes but would love to hear your thoughts!ДЄnalog is such a complex topic and it's hard to just theorise. This looks great and as you say, Rega have implemented on recent decks, but the theorist in me can't help asking: 'doesn't it transmit motor noise/rumble straight into the base of the arm?' So, count on my offer in some time, after I've got my new Ortofon 2M Red going. So you still need another spacer if you want to increase the VTA. The top bracing would raise both the tonearm and the sub-platter by 2mm. Does the bracing work with a spacer or can I replace a spacer with the bracing? If the braces are about 2mm thick, do they lift the arm about the same level? I'm asking because I'm thinking about buying a spacer for the arm. If the external diameter of the P7 main bearing hub is less than 18.0mm(e.g 17.95mm, then you have not problem using my top bracing. You don't list that these will work with a P7-I know the main bearing assembly is different-is it possible that one of these will work on a P7? Nice to hear from you! The brace thickness is about 2mm (+-) This comment has been removed by the author. I believe even models with thicker and stronger plinths like P5, P25 would benefit from the added rigidity/strength provided by the bracings. In short, the bracings are good for improving the rigidity which directly affects the sonic performance of the turntable. What about natural silvery color bracing? It's incorporated with my own'honeycomb-like'design for maximum possible rigidity. I have used metal alloy(aluminium with magnesium) to design a bracing for my own RegaВ TT's.В It's light weight (to achieve low mass concept) with strength. Planar 2/3) which could have been 'compressed' (or 'sagged') at the main bearing point due to loading over long period of time (e.g sub-platter found touching the plinth even with right size of ball bearing in the bearing hub). It's also beneficial for many old plinths ( e.g. So it's essential, at all times, to maintain a rigid connection between the tonearm and the main bearing hub in which the sub-platter/platter spins.ДЄddingВ bracing is one good way to increase the rigidity between these two points.В This is especially true for thinner/weaker plinths. We have seen the newer models of Rega TTs' like RP3 and RP6 spot bracings between the main bearing hub and the tonearm base on the top as well as the bottom of the plinth.ДЄs we know the geometry of bearing hub relative to tonearm is crucial for any turntable. The concept of bracing for turntables is nothing new. Michael Lim Top Metal bracing suitable for Rega tu.Michael Lim Bottom bracing suitable for some model.

Rega plinth upgrade